Trimech-Main-Site-Group-Navigation Trimech-Main-Site-Group-Navigation Trimech-Main-Site-Group-Navigation Solid-Solutions-Group-Navigation Javelin-Group-Navigation Solid-Print-Group-Navigation 3DPRINTUK-Group-Navigation Trimech-Enterprise-Solutions-Group-Navigation Trimech-Enterprise-Solutions-Group-Navigation Trimech-Advanced-Manufacturing-Group-Navigation Trimech-Staffing-Solutions-Group-Navigation
With over 35 years of experience, the TriMech Group offers a comprehensive range of design, engineering, staffing and manufacturing solutions backed by experience and expertise that is unrivalled in the industry. The TriMech Group's solutions are delivered by the divisions and brands shown here, use the links above to visit the group's websites and learn more.

Bambu Lab AMS – Automatic Material System

Bambu Lab AMS - Automatic Material System

£309.00 ex. VAT

Sold Out

GTIN: 6975337030034 SKU: SA001 Categories: , Tags: ,

Bambu Lab AMS – Automatic Material System


Product details:

– Ability to use multiple colours and materials
– Maintain Dry Filament
– Detecting filament runout and winding
– The AMS Filament Backup

Bambu Lab AMS – Automatic Material System



Bambu Lab AMS - Automatic Material System



Bambu lab ams Support up to 16 colours

Printing with Multiple Materials, up to 16 Colours


Each Bambu Lab AMS has 4 filament slots and supports up to 16 colours for breath-taking prints. Up to 4 AMS can be installed in tandem. Connect 4 AMS via the AMS hub to produce 16-color printing.

Suitable for the majority of materials, including PLA, ABS, ASA, PETG, PC, and more.


Bambu lab Removing Support Without Hassle

Removing Support Without Hassle


With AMS, Bambu Lab printers can utilise dissolvable filament or snap-away support material to lessen the discomfort of removing supports.


Bambu lab No More Filament Leftover

No More Filament Leftover


Without AMS, replacing the spool manually when the filament runs out causes printing to stop and wastes filaments.

With AMS, switching to a new spool is smooth, maintaining uninterrupted printing and reducing waste.


Bambu lab Backup Filament

Detecting filament runout and winding


Printing is never interrupted thanks to automated spool switching. Never fear about running out of filament while you’re sleeping or away again with the AMS filament backup function, which guarantees a smooth and uninterrupted printing process, prevents any filament waste, and encourages energy economy.

AMS can detect resistance at the tool head instantly and halt printing to prevent empty printing, which could be caused by tangled filament or a stopped spool.


Bambu lab Superior Intelligence System

Superior Intelligence System


The AMS has achieved previously unheard-of intelligence levels thanks to a 32-bit MCU, sensor arrays, actuators, and an intelligent algorithm. It efficiently handles defect detection and recovery, as well as the loading and unloading of filaments.


Bambu lab AMS Leave Wet Filaments Behind

Leave Wet Filaments Behind


Filament that has absorbed moisture can cause poor layer adhesion, print quality problems, and even nozzle clogging that can result in a failed print.

With the use of desiccant material, the AMS’s airtight seal absorbs moisture to keep it away from the filament. The humidity within the AMS is also detected by a humidity sensor, which informs the user when the humidity is higher or the desiccant might need to be changed.

Filament that is dry is necessary for the greatest print quality.


Bambu lab RFID Intelligent Printing

Automatic Filament Recognition


Bambu Lab filaments use RFID, which the AMS reads to determine the ideal settings for your material automatically. The RFID tag and Bambu Studio are immediately synchronised.

Non-Bambu Lab Filaments require manual configuration in the printer or in Bambu Studio.



You may also like…

What's Included

  • Bambu Lab AMS – Automatic Material System
  • PTFE Tube
  • Bus Cable – 6pin & Bus Cable – 4pin
  • Spare Filament Cutter (x2)
  • PTFE Tube Connector
  • Filament Buffer
  • Reusable Spool (x3)
  • High Temperature Reusable Spool

*AMS cannot be used with materials that are excessively soft, brittle, or abrasive, such as Bambu PET-CF/ TPU 95A, and TPE, TPV, PVA, PET-CF/GF, PA-CF/GF, PAHT-CF/GF, etc. We strongly advise utilising a spool adapter if you like to use cardboard spools to lessen the chance of slippage and debris becoming caught in the AMS.


Sign up to receive 3D printing knowledge delivered directly to your inbox.

Solid Print3D Ltd Building 500, Abbey Park, Stareton, Kenilworth, Warwickshire, CV8 2LY Copyright © 2024 Solid Print3D All Rights Reserved.
01926 333 777