The Raise3D E2 is an easy to use, industrial-grade 3D printer. The E2 provides manufacturers with the needed resources to integrate desktop 3D printing solutions in their manufacturing capabilities, whilst remaining affordable and accessible.
Compatible Materials with the Raise3D E2:
The Raise3D E2 is Compatible with a wide range of materials which temperatures ranging up to 300℃.
IDEX (Independent Dual Extruders)
The Raise3D E2 uses 2 independent extruders, enabling two modes of printing/
Mirror Mode – Produce a 3D model and its inverse simultaneously, increasing productivity and reducing time taken to print.
Duplication Mode – Both extruders are used in synchronized printing, doubling production capabilities.
Build Volume:
The E2 features a 13 x 9.4 x 9.4 inch or 330 x 240 x 240 mm build volume, optimal for bigger prints and new designs.
E2 Accuracy:
The layer height of the E2 lies at 0.02 – 0.25mm, giving a high level of accuracy in your printing.
HEPA Filter:
To reduce the emissions from the printing process, HEPA (High-efficiency particulate air) filter is used. The filter is of particular benefit if you plan to site your 3D printer in a shared space.
Filament Sensor and Camera:
The E2 has a sensor that will instantly pause the printing process if the filament malfunctions or run out.
Unboxing, Box Contents, and Setup:
The Raise3D E2 also comes exceptionally well packaged to prevent any possible damage. And in addition to that, a quick start guide is available on top of the contents. Please read!
Video-Assisted Offset Calibration System
With the Raise3D E2, you can spend less time calibrating and more time printing with an industry-first automatic calibration using the inbuilt camera system.
