Raise3D Pro 2 is one of the few professional large format 3D printers for a £3,000 budget. It offers a spacious 305 x 305 x 305 mm build volume. Raise3D pride themselves on the development of high- quality, reliable and affordable 3D printers. Furthermore, you can use this 3D printer to produce small quality parts with this Raise3D Pro 2 with the 10 micron resolution.
The Raise3D Pro2 is Compatible with a wide range of materials thanks to its high- temperature extruder (300°C) and magnetic print bed (110°C) as well as its closed frame.
The Raise3D pro 2 allows for multi-material 3D printing with electronic-driven lifting, for four times higher torque performance. It enables you to utilise a flexible filament like TPU (rubber) and increases the rate of accuracy and reliability.
Pro 2 Accuracy:
The layer height is one of the best on the market, as 10 microns allows a level of accuracy that most of its competitors cannot replicate.
To reduce the emissions from the printing process, HEPA (High-efficiency particulate air) filter is used. The filter is of particular benefit if you plan to site your 3D printer in a shared space.
Filament Sensor and Camera:
The Pro2 has a sensor that will instantly pause the printing process if the filament malfunctions or run out. For close monitoring, the Raise3D Pro 2 has a built-in camera.
Unboxing, Box Contents, and Setup:
The Raise3D Pro 2 also comes exceptionally well packaged to prevent any possible damage. When you open the box of Pro 2, there are five small boxes containing various components on the top. And in addition to that, a quick start guide is available on top of the contents. Please read!
7’’ Touch Screen:
The Raise3D Pro 2 has a significantly improved 7″ touch screen over previous models, is easier to use and allows you to print objects, maintain your printer & upgrade firmware.