BCN3D PET-G Filament


£37.99 ex. VAT

£45.59 incl. VAT

  • By purchasing this consumable, Solid Print will plant 1 tree

SKU: N/A Categories: , , Tags: ,

Moisture Resistant | Heat Resistant | Easy


Versatile & Technical Material – PET-G (Polyethylene terephthalate glycol-modified) is a polyester thermoplastic characterised by a good balance of tensile strength and elongation at break.

It’s high resistance to water and chemicals makes it the material of choice for water-tight containers and protective cases.

PET-G is a versatile technical material, as easy to print as PLA, but with an improved balance of mechanical, chemical and thermal properties.


Good balance of strength and ductility – PET-G parts are as strong as those made with PLA but offer a better mechanical profile. PET-G is not brittle, which means that it will not snap abruptly if pulled or bended, on the contrary, it will progressively bend and stretch until reaching it maximum elongation limit of 23%.



  • Parts in contact with salts, acids and alkalis
  • Functional prototypes and mechanical parts
  • Waterproof applications
  • Structural parts subject to mild stress
  • Snap-fit joints
  • Commonly used in beverage bottles


  • Resistance to corrosive chemicals
  • Good balance of strength, impact resistance and elongation at break
  • Great dimensional stability and toughness
  • Good glossy surface quality
  • Good abrasion resistance
  • Water and moisture barrier
  • Withstand operating temperatures up to 70°C
  • Low rate of ultrafine particles (UFP) and volatile organic compounds (VOC)
  • Compatible with PVA supports



Technical Data Sheet


Safety Data Sheet



Extruder temp 240° C – 260° C
Cooling fan 0-25%
Min. layer height 0.1-0.2mm
Bed temp. 90° C
Speed 40-80mm/s


For BCN3D Cura users:

Get a proper printing profile for PET-G using the ones integrated into the BCN3D Cura. Download the latest version of BCN3D Cura.


Bed adhesion:

To ensure good bed adhesion use Magigoo.



Plastics absorb moisture from the air, it is recommended to keep the PET-G spools in a box or airtight container with desiccant to keep them dry.

For a better print quality use an enclosure.

PET-G emits low levels of gasses and particles when printed.

We recommend printing it in a well-ventilated area.


Sign up to receive 3D printing knowledge delivered directly to your inbox.

Solid Print3D Ltd Building 500, Abbey Park, Stareton, Kenilworth, Warwickshire, CV8 2LY Copyright © 2022 Solid Print3D All Rights Reserved.
01926 333 777