Markforged Logo

Explore our range of Markforged 3D printers, whether you need parts as strong as metal, flame retardant parts or tough & durable parts Markforged is your go to Industrial 3D Printer

Markforged X7

Prototypes

 

With the new functionality of the Markforged printers, it is now possible to immediately test your printed parts for fit & function, using materials that not only look good, but are strong too. This means that prototypes have lower failure rates and your development cycles will be reduced greatly, saving you money, materials and time. See some examples below.

Jigs, Toolings & Fixtures

 

The applications for Markforged 3D printers are endless. Due to this, you can improve many of the tasks carried out during the processes of fabrication and manufacturing with custom parts. You can expect to experience reduced costs of such processes alongside shorter lead times and increased machine bandwidth. This makes purchasing a Markforged 3D printer a very cost-effective decision. Costing examples below.

End Use Parts

 

With the use of 3D printing, you can now manufacture end use parts as a viable alternative to manufacturing via tradtional, more expensive methods.

Compared to the low volume techniques used previously, 3D printing is incredibly cost effective and will still produce strong, superbly finished parts ready for End Use. This will subsequently reduce your overrall manufacturing costs.

Printing Process : Fused Filament Fabrication

 

Build Volume : 320 x 132 x 154 mm (12.6 x 5.2 x 6 in)

 

Reinforcement Materials : None

 

Layer Height : 100 μm default, 200 μm maximum

Infill : Closed cell infill: multiple geometries available

 

Base Materials : Onyx

 

Tensile Strength : 36 MPa (1.2x ABS) *

 

Find Out More  or  Download Datasheet

Printing Process : Fused filament fabrication, Continuous Filament Fabrication

 

Build Volume : 320 x 132 x 154 mm (12.6 x 5.2 x 6 in)

 

Reinforcement Materials : Fiberglass

 

Layer Height : 100 μm default, 200 μm maximum

Infill : Closed cell infill: multiple geometries available

 

Base Materials : Onyx

 

Tensile Strength : 590 MPa (19.0x ABS, 16.4x Onyx) *

 

Find Out More  or  Download Datasheet

Printing Process : Fused filament fabrication, Continuous Filament Fabrication

 

Build Volume : 320 x 132 x 154 mm (12.6 x 5.2 x 6 in)

 

Reinforcement Materials : Carbon fiber, fiberglass, Kevlar®, HSHT fiberglass

 

Layer Height : 100 μm default, 200 μm maximum

Infill : Closed cell infill: multiple geometries available

 

Base Materials : Onyx, Nylon White

 

Tensile Strength : 800 MPa (25.8x ABS, 22.2x Onyx) *

 

Find Out More  or  Download Datasheet

Printing Process : Fused filament fabrication

 

Build Volume : 330 x 270 x 200 mm (13 x 10.6 x 7.9 in)

 

Reinforcement Materials : None

 

Layer Height :

Infill : Closed cell infill: multiple geometries available

 

Base Materials : Onyx, Onyx FR

 

Tensile Strength : 36 MPa (1.2x ABS) *

 

Find Out More  or  Download Datasheet

Printing Process : Fused filament fabrication, Continuous Filament Fabrication

 

Build Volume : 330 x 270 x 200 mm (13 x 10.6 x 7.9 in)

 

Reinforcement Materials : Fiberglass

 

Layer Height : 100 μm default, 50 μm minimum, 200 µm maximum

Infill : Closed cell infill: multiple geometries available

 

Base Materials : Onyx, Onyx FR

 

Tensile Strength : 590 MPa (19.0x ABS, 16.4x Onyx) *

 

Find Out More  or  Download Datasheet

Printing Process : Fused filament fabrication, Continuous Filament Fabrication

 

Build Volume : 330 x 270 x 200 mm (13 x 10.6 x 7.9 in)

 

Reinforcement Materials : Carbon fiber, fiberglass, Kevlar®, HSHT fiberglass

 

Layer Height : 100 μm default, 50 μm minimum, 200 µm maximum

Infill : Closed cell infill: multiple geometries available

 

Base Materials : Onyx, Onyx FR, Nylon White

 

Tensile Strength : 800 MPa (25.8x ABS, 22.2x Onyx) *

 

Find Out More  or  Download Datasheet

Eiger : Production-Ready Printer Management

 

Not only are Markforged manufacturing superior 3D Printing technology, they also supply class leading software FOC to make your Markforged experience as seamless as possible between software and hardware. Eiger is powerful and easy to learn, allowing its users to import and slice their 3D models directly from their web browser and send to the printer via WiFi.

 

Explore

Arrow Case Study Preview

Breaking Through The Mark Two has brought parts from $400 down to a few dollars, from two week lead times down to one night, and has changed the way Arow Global designs and fabricates their parts.

 

 

Download

Markforged Unilever Case Study

An ABS 3D printer was used in the factory initially, however it did not meet expectations. Using Markforged technologies, Loska has designed, printed, and installed long term factory solutions in just a single day, saving the production plant hundreds of dollars per week.

 

Download

Guide to 3D Printing on the Production Line Preview

Many manufacturers have realized significant cost savings and productivity improvements by integrating high strength additive manufacturing (AM) technology into their business, especially in support of their maintenance, repair and operations (MRO) strategy.

 

Download

Markforged Use Case - Dixon Gripper Composite Preview

Markforged enabled Dixon Valve to produce new manufacturing tooling solutions faster and cheaper than ever before. System Engineer J.R. Everett describes the Markforged machines as “a critical component in our design process [that’s] really changing the way we work”

 

Download

About Solid Print3D

Solid Print3D is the 3D Printing Business Unit of Solid Solutions – the UK’s largest SolidWorks reseller and one of the largest SolidWorks resellers in the world. We support over 15,000 design & engineering companies offering seamless 3D CAD to 3D Print Support.

This customer base has allowed us to partner with the leading 3D Printing manufacturers offering best in class solutions to the UK & Ireland.

Solid Print3D offer honest advice, best in class products and world class support which has allowed us to become a trusted partner to so many UK & Ireland businesses.

We would love to hear from you.

Get Advice On The Right
3D Printer For Your Business





Choosing the right 3D Printer for your business?

Whether this is your first foray into 3D Printing, or if you are a 3D Printing veteran, choosing the right printer for your requirements can be a daunting task. With new acronyms appearing every week and the industry rapidly evolving it can be difficult to understand the technology, systems, materials, mechanical properties and surface finishes and which methodology is going to work best for you. Below we list some typical questions you will need to think about:

What is the Maximum size I will need to print?

Printers come in all shapes & sizes. One of the first questions you should ask yourself is, what is the largest part i will need to print” and “am i happy gluing smaller parts together?” Our printers have varying build volumes from a 200mm cube to a full 1m cube and getting this right will save you money & time.

My product needs specific mechanical properties.

The 3D Printing industry is moving at an ever-increasing pace, but the biggest strides are being made with a variety of materials now available. Will you part need to withstand a load, withstand high temperatures, work in an abrasive environment, withstand UV light, or is it just a quick prototype to test the aesthetics? From everyday PLA to Continuous Carbon Fibre or even Metal printing we can advise you on the best material & technology for your needs.

My part needs to be highly detailed.

The surface finish on 3D Printed parts is getting better with every new generation of printers & the advances being made with material science. Typically SLA (Stereolithography) produces a better, most consistent finish than FDM but this comes at a slightly higher cost with materials. FDM printers are good enough for most applications these days but for an “injection moulded” look & feel, SLA is your go-to technology.

What is the lifetime cost of a 3D Printer?

Typically a 3D printer is costed over a 3 year period. The ROI (return on Investment) can vary depending upon the application but it’s not uncommon to see a 3D Printer producing production parts pay for itself within 3 months. If you are currently outsourcing 3D Printing, want to check fit & function, or just rapidly iterate you design without lengthy lead times, 3D Printing is a tool that saves businesses time & money every day.

STAY IN TOUCH

Sign up to receive 3D printing knowledge delivered directly to your inbox.