Trimech-Main-Site-Group-Navigation Trimech-Main-Site-Group-Navigation Trimech-Main-Site-Group-Navigation Solid-Solutions-Group-Navigation Javelin-Group-Navigation Solid-Print-Group-Navigation 3DPRINTUK-Group-Navigation Trimech-Enterprise-Solutions-Group-Navigation Trimech-Enterprise-Solutions-Group-Navigation Trimech-Advanced-Manufacturing-Group-Navigation Trimech-Staffing-Solutions-Group-Navigation
With over 35 years of experience, the TriMech Group offers a comprehensive range of design, engineering, staffing and manufacturing solutions backed by experience and expertise that is unrivalled in the industry. The TriMech Group's solutions are delivered by the divisions and brands shown here, use the links above to visit the group's websites and learn more.
[rev_slider_vc alias=”kora-landing-slider”]

KORA 3D Printer Safety Enclosures


Manufactured and fully tested by the UK Government Agency HSE (Health and Safety Executive) laboratory, The Safety Cabinet works on the principal of drawing in air from the room through lower air intake vents, then gently and at a constant velocity washing it over an operating FFF / FDM Desktop 3D Printer, before exhausting it back out through a specially treated , easily replaceable, high volume HEPA / Active Carbon Filter system. This process removes emitted and potentially dangerous human ingestible particles (including Ultra Fine), many toxic chemicals (VOCs) and unpleasant odours often produced by different filaments during the desktop FFF / FDM 3D Printing process.


Removes airborne hazardous substances and particles given off during the 3D printing process – including PLA

Prevents “burn“ hazards from common ‘VERY HOT’ 3D Printer parts and components ie. printing nozzle, heater block, heated bed etc.

Prevents “trap” hazards from common moving mechanical 3D Printer components ie. toothed belts, gears, sliding mechanisms etc.

Door lock also helps prevent unauthorised access and opportunist theft of models and valuable 3D Printer machines.

Significant noise reduction from any 3D Printer operating inside the enclosure – cooling fan, motor noise etc.

Reduces common print failures by protecting against drafts of warm and/or cold air coming from an open window or door in the printers location.

Incorporates LCD Temperature and Humidity display in the front door to display the environment inside the enclosure.

Supplied in ‘part built kit form’ for convenient shipping and easy build.

Designed and is built for easy environmental deconstruction (easy and full recyclability of construction materials)

Automatic Fire Extinguisher, Heat Sensor Alarm, LED Lighting kit are NOT INCLUDED (all easy pre-prepared bolt-on available accessories)

Door Lock : Cam lock Style (supplied with x2 keys)

Technology : Particulate Filtration System

Conformity : CE Marked, HSE Laboratory Tested

Airflow System : Negative Pressure Indirect Nozzle Vortex Air Flow System

Construction : Powder Coated Steel

Packaging : Cardboard – Part Flat Packed System

Tested To : BS EN 1093 (2006) Safety of machinery — Evaluation of the emission of airborne hazardous substances

Filter Type : Specially Constructed HEPA / Active Carbon type with Pre-Filter – Maximum 400 hours or 12 Months between Filter Unit Exchange (whichever occurs first)

Maximum Load Capacity (Bench or Floor Mounted SC-01) : 50 Kilograms Evenly Spread

Clear Panels and Door : Fire and Shock Resistant PETG

Operating Voltage : 12 Volts DC

Temperature and Humidity Display : LCD Display of Internal Safety Cabinet Environment

Power Supply (Switching Type) : 100-240V AC 50/60Hz – 24W / 12V 2A

Power Supply Connector : 2.1 x 5.5 x 12mm Barrel Style / Fixed UK Style Plug

Power Supply Conformity : UL, CE, ErP VI

Power Supply Safety Features : Built In Over Voltage / Over Current and Short Circuit Protection

Serial Numbering System : Unique Allocated and Recorded Number

Patent Pending : Number 1820397.6

Optional Fire Extinguisher : Dry Powder Automatic Trigger @ c. 79C

Optional Heat Sensor Alarm : 10 Year Built-In Battery System Trigger @ c. 59C (Class A1 Heat Alarm)

Optional Lighting Kit : LED Light Unit(s) – 12 Volts DC – Powered from Existing Safety Cabinet Power Supply

Optional SINGLE ST-01 Safety Trolley and DUAL ST-01 Safety Trolley : Powder Coated Steel Construction

Total Maximum Load Capacity (ST-01) Single and DUAL Versions : 120 Kilograms In TOTAL Including Shelves (See Weight Distribution Details Below)

Maximum Load Capacity (ST-01) DUAL – Top Mounted SC-01 : 30 Kilograms – MUST NOT BE USED Without A Heavier Printer FIRST Installed Into The LOWER SC-01

Single ST-01 Safety Trolley Total Height (inc. SC-01) : 1700mm from Floor to Top of SC-01 Filter Housing

DUAL ST-01 Safety Trolley Total Height (inc. x2 SC-01’s) : 1890mm from Floor to Top of Upper SC-01 Filter Housing

Internal Dimensions (SC-01) : 575mm wide x 535mm deep x 634mm high


Internal Dimensions (SC-02) : 402mm wide x 441mm deep x 638mm high


Internal Dimensions (SC-03) : 602mm wide x 555mm deep x 998mm high


Internal Dimensions (SC-04) : 460mm wide x 550mm deep x 578mm high (TBC)


Internal Dimensions (SC-05) : 788mm wide x 870mm deep x 1025mm high

External Dimensions (SC-01) : 662mm wide x 658mm deep x 810mm high


External Dimensions (SC-02) : 452mm wide x 542mm deep x 792mm high


External Dimensions (SC-03) : 652mm wide x 652mm deep x 1152mm high


External Dimensions (SC-04) : 510mm wide x 650mm deep x 735mm high (TBC)


External Dimensions (SC-05) : 848mm wide x 968mm deep x 1180mm high

About Solid Print3D

Solid Print3D is the 3D Printing Business Unit of Solid Solutions – the UK’s largest SolidWorks reseller and one of the largest SolidWorks resellers in the world. We support over 15,000 design & engineering companies offering seamless 3D CAD to 3D Printers and Support.

This customer base has allowed us to partner with the leading 3D Printing manufacturers offering best in class solutions to the UK & Ireland.

Solid Print3D offer honest advice, best in class products and world class support which has allowed us to become a trusted partner to so many UK & Ireland businesses.

We would love to hear from you.

Get Advice On The Right Safety Enclosure for your 3D Printer


Sign up to receive 3D printing knowledge delivered directly to your inbox.

Solid Print3D Ltd Building 500, Abbey Park, Stareton, Kenilworth, Warwickshire, CV8 2LY Copyright © 2024 Solid Print3D All Rights Reserved.
01926 333 777