7″ Colour Display:
Pro2 Plus has a 7-inch colour display which makes it easy to operate by providing high-quality visuals & an extremely easy to use interface.
Looking to print with a soluble support or print a hard & soft plastic together? The Raise3D Pro 2 Plus has you covered offering a dual nozzle configuration. (If you are looking to print with abrasive materials like chopped Carbon/ Glass Fibre stainless coated nozzle is available.)
New 3D printing bed:
The Raise3D Pro Plus works with a new heating bed made of silicon. This increases the adhesion of our components on the build platform offering flawless adhesion.
The Raise3D Pro2 Plus allows you to print at high production speed and a superior 3D printing quality. With different nozzle you can print layers heights down to 10 microns and up to 600 microns.
A unique feature of this printer is the resume function after a power cut. Typically this would write your print off but the Raise3D printer comes with a battery which keeps your 3D print paused ready to restart when the power comes back on. Further to this the Raise3D Pro 2 Plus will pause if your filament runs out mid-print.
HEPA Air filter:
Absorbing over 99% of the particles produced by the 3D Printing process, it is environmentally friendly and silently protects the printer users.
Thanks to its high- temperature extruder (300C), the Pro2 Plus is Compatible with a wide range of materials. The magnetic print bed and its closed frame also play an important part to make it compatible with a variety of materials. Raise3D provide their own materials but the printer is opensource meaning you can print with anything you require.
The upgraded build plate system in Pro2 plus is best for warp prevention, extended life, and even heat distribution.